Leak Solutions systems are used in new buildings and renovations. A great number of customers put their trust in our sophisticated Waterproofing, Coating, Chemical Grouting systems. Discover for yourself our services, our solutions and the proven safety of systems.

We Leak Solutions Are Specialist In Polyurethane Injection Works Which Include All Kind Of Injection Resin Single Component & Double Components High Presser Pump With The Ability To Stop Any Kind Of Leak In Basement Dam Wall Building Retaining Wall Underground Tunnels Cracks In Concrete And Concrete Tanks.

Why Choose Leak Solutions ?

• Quality is our first preference
• we finished our work on time.
• we only use quality materials for our projects whether it is New or existing structures.
• we only use best skilled people for our projects.
• our rates are low when compared to others.

Leak Solutions Has A Strong Focus On Waterproofing Systems, Meeting Todays Customers’ Requirements And Complying With The Latest Technologies And Standards.

Leak Solutions Systems Are Used In New Buildings And Renovations. A Great Number Of Customers Put Their Trust In Our Sophisticated Waterproofing, Coating, Chemical Grouting Systems. Discover For Yourself Our Services, Our Solutions And The Proven Safety Of Systems.

24/7 Emergency Waterproofing Services.

Call Us +91 738 784 1955 | +91 701 430 9758

Email Us leaksoluations@gmail.com

Below Are The Following Services We Offer

When do we need a PU GROUTING?

When there is damaged concrete, when there are deep holes in wall, cracks in concrete floors, basement, swimming pools, side walls or even pipes and sewer lines. These are properly identified by leak solutions Construction engineers with a thermal waterproofing method to provide scientific information to justify our repair method to perform a PU Grouting method.

PSC GIRDER

Concrete is an economical construction material and for that reason it is widely used in buildings and infrastructures. The use of deicing salts, expansion joint failure, and freeze–thaw cycles have led to concrete bridge girders experiencing corrosion of steel reinforcement and becoming unsafe for driving. The goal of this research is to assess the effectiveness of current and possible repair techniques for the end region of damaged prestressed concrete girders.

To do this, three American Association of State Highway and Transportation prestressed concrete girders were tested to failure, repaired, and retested. Three different repair materials were tested including carbon fiber, glass fiber, and surface mounted rods. Each different repair material was also tested with and without injected epoxy. Comparisons were then made to determine if injecting epoxy had a positive effect on stiffness and strength recovery as well as which repair type regained the largest percentage of original strength.

Waterproofing /Dam Proofing Membrane

Waterproofing /dam proofing membrane in horizontal and vertical applications for protection of various substrates like concrete, masonry, GI, aluminum, wood etc. in wide range of uses: accessible and non accessible medium to large roof slabs in domestic, commercial and industrial construction.( As per specified system for accessibility) Basements and raft slabs Swimming Pools Roof Gardens Underground car parks Bridges & Tunnels.

Fosroc Brushbond Waterproofing Chemical

Fosroc Brushbond Waterproofing Chemical is a two component acrylic polymer modified elastomeric waterproofing membrane which consists of Brushbond powder and Nitobond BB acrylic emulsion. It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced.

Swimming Pool Waterproofing

SWIMMING POOL WATERPROOFING. TREATMENT BEFORE CONSTRUCTION OF RCC BASE SLAB OF TANK. Repair/Smoothen the surface of PCC by 1:4 Cement Sand mortar. Apply 2 coats of cement base polymer/acrylic modified highly flexible waterproof coating.

A high level of impermeability to water, providing full sealing of the bowl; ability to increase the strength qualities of the surfaces; good adhesion with the foundation material; good resistance to freezing and degree of penetration of the mixture; protection of the pool structure against corrosion and aggressive chemical substances; convenient and simple application; prevention of the spread of microorganisms and mold; environmental and sanitary soundness.

Expansion Joint

How to avoid leakage at Expansion joints of building.Here the right solution for Expansion joint. How To Repair Expansion Joints There are two ways to repair expansion joints in concrete. The best way to repair them depends on the condition of the joint. Damaged Expansion Joints If the top of the expansion joint has cracks and spall marks, then the joint is starting to deteriorate. Whether they cause be from high traffic on the surface, water, or age, here is how to repair them:

1) First, clean out the expansion joint. Make sure it is free of debris, dust, and any other chemical or material that could prevent the repair material from properly adhering. 2) Fill the entire expansion joints, up to the surface and over the damaged areas, with the FS-90 Crack Repair Kit. 3) Allow it to cure completely, about an hour, then re-cut your expansion joints – make them about ¾” deep. 4) Install a backer rod then dispense the JFX-35 Joint Filler over the backer rod and completely fill in the joint.

Basement Waterproofing

Waterproofing a foundation from the outside typically involves using polymers and membranes to coat the exterior of the walls, installing a trench drain underground, or a combination of both methods. When done properly, exterior drainage is generally considered to be the most effective way to waterproof a basement.

Waterproofing is the process of making an object or structure waterproof or water-resistant so that it remains relatively unaffected by water or resisting the ingress of water under specified conditions. … Modern items may be waterproofed by applying water-repellent coatings or by sealing seams with gaskets or o-rings.

Water Tank Waterproofing

Water tanks in large complexes and even in small homes, are usually placed underground or overhead. Therefore there is always, a chance that water may seep through the common joints between the house and the tank; especially if the tank is badly constructed, or simply not waterproofed.

This is a huge risk because leakage and seepage can damage your internal walls, and even result in health complications to the inhabitants.
Repairing an existing water tank is a time-consuming process. It is very difficult to pin point the exact location of the leakage. Water travels through the smallest capillaries, and can be visible or drip through a part of the structure, when in fact the point of leakage is actually somewhere else.

Wet Areas Waterproofing

When properly installed wet rooms are completely waterproof, providing reassurance that water will not leak through any of the walls or floor. This also means a wet room can potentially be installed on any floor of your house

Terrace Waterproofing

Terrace Waterproofing is a mandatory requirement for any building structure. It has been noticed that some builders/Contractors try & avoid Waterproofing believing that their concrete is good enough to stop water penetration which is a myth.

There comes the need for Waterproofing. There are various methods of Terrace Waterproofing like: Cementitious Polymer Coating Liquid Applied Membranes Preformed Membranes The choice of the right method of waterproofing depends on various factors like: Area of Terrace slab Uses of Terrace Climatic Condition Condition of Terrace Slab

Podium Waterproofing

An effective and durable waterproofing system is critical for ensuring the long-term durability of the structure and to keep maintenance costs to a necessary minimum. In sensitive building areas like podium slabs where you plan for water bodies, landscaping, children play area, sports facilities, car parking, driveways etc, proper waterproofing system helps to keep out water and pollutants, thereby, preventing leakages and also protecting the structural elements and embedded steel reinforcement from damage due to corrosion.

Brick Bat Coba Waterproofing

Brick Bat Coba Waterproofing is a Traditional method which is used for the waterproofing of the structures. Brick Coba is the oldest method of waterproofing to the structures which includes the laying of Brocken bricks on the flat surface of the concrete and grout it with a waterproofing compound with the proper slope to drain off the rainwater.

It is a Traditional method which is used by the ancient people in which they use the broken bricks in the slab by which it absorbs the excess moisture and prevents the entry of moisture.

For Any Inquiry Contact Us Direct on +91 701 430 9758. +91 738 784 1955

Reach Us Green Park Building, A/4, near Best Colony, Santacruz West, Mumbai, Maharashtra 400054